La
Meccanica srl di Reffo- We produce stainless dies for all kinds of pellet
mills:
La Meccanica, Buhler, Matador, VanAarsen, CPM, Paladin, Mabrik etc.
| < BACK
TO MAIN PAGE |
|
|
::
THE TERMINOLOGY OF DIES |
 |
|||||||||
|
|
The die is often made with a thicker than required for feed compression, to give the die greater strength. The holes are then drilled from the outside diameter of the die with a larger diameter drill leaving the original hole at the required effective pelleting length. |
|||||||||
